29.21.29 WellTestProductionTestResults

Topic Version	1	Published	12/09/2016	Topic Change History
For Standard	PRODML v2.0
Type:	Class		Stereotype:	«XSDcomplexType»

Oil, gas, and water volumes and rates measured during the well test. The volumes allow either actual volumes or standard (corrected) volumes. The densities are also recorded with the volumes.

Table 29.21.29-1 Attributes
Name	Type	Notes
AllocatedSplit	boolean	True ("true" or "1") indicates that the split factors are allocated as opposed to measured. False ("false" or "0") or not given indicates otherwise.
BasicSedimentAndWater	VolumePerVolumeMeasure	This is the measured of impurities present in crude oil as it comes from the well. BSandW content is commonly used as a measure for treating performance of hydrocarbon liquids
CondensateSplitFactor	VolumePerVolumeMeasure	The split factor for condensate relative to the overall volume of the test.
CondensateYield	VolumePerVolumeMeasure	This is the condensate yield, which describes the amount of condensate per unit of natural gas produced
Density	MassPerVolumeMeasure	The density of the fluid mixture.
FluidVelocity	AngularVelocityMeasure	The velocity of the overall fluid mixture.
GasOilRatio	VolumePerVolumeMeasure	The ratio of the volume of gas and the volume of oil that was produced.
GasPotential	VolumePerTimeMeasure	This is the potential of the well to produce natural gas. This represents the flow rate that could be achieved under maximum drawdown.
GasSplitFactor	VolumePerVolumeMeasure	The split factor for gas relative to the overall volume of the test.
OilPotential	VolumePerTimeMeasure	This is the potential of the well to produce crude oil. This represents the flow rate that could be achieved under maximum drawdown.
OilSplitFactor	VolumePerVolumeMeasure	The split factor for oil relative to the overall volume of the test.
ProductivityIndex	VolumePerTimePerPressureMeasure	Productivity index (PI) is an expression which defines the pressure drop in the reservoir to produce a unit of oil per day. That is, the energy to produce a unit of oil. The value was defined at ambient temperature and pressure.
ProductivityIndexStdTempPres	VolumePerTimePerPressureMeasure	Productivity index (PI) is an expression which defines the pressure drop in the reservoir to produce a unit of oil per day. That is, the energy to produce a unit of oil. The value has been converted to the declared conditions of standard temperature and pressure.
SandVolume	VolumeMeasure	The volume of sand that was produced.
WaterCut	VolumePerVolumeMeasure	The ratio of water produced compared to the volume of total liquids produced.
WaterSplitFactor	VolumePerVolumeMeasure	The split factor for water relative to the overall volume of the test.

Table 29.21.29-2 Associations
Association	Notes
From: WellTestProductionTestResults.WaterRate 0..1To: WellTestFluidRate Association
From: WellTestProductionTestResults.CondensateVolume 0..1To: WellTestTestVolume Association
From: WellTestProductionTestResults.OilRate 0..1To: WellTestFluidRate Association
From: WellTestProductionTestResults.WaterVolume 0..1To: WellTestTestVolume Association
From: WellTestProductionTestResults.CondensateRate 0..1To: WellTestFluidRate Association
From: WellTestProductionTestResults.GasVolume 0..1To: WellTestTestVolume Association
From: WellTestProductionTestResults.OilVolume 0..1To: WellTestTestVolume Association
From: WellTestProductionTestResults.GasRate 0..1To: WellTestFluidRate Association
From: WellTestProductionTestData.ProductionTestResults 0..1To: WellTestProductionTestResults Association