12.4.7 DrillReport
| Topic Version | 1 | Published | 11/11/2016 | ||
| For Standard | WITSML v2.0 | ||||
| Type: | Class | Stereotype: | «XSDcomplexType» | ||
Used to capture a daily drilling report focused on reporting from the operator to partners or to a governmental agency. For a similar report whose focus is service company to operator, see
|
Name |
Type |
Notes |
|---|---|---|
|
BitRecord |
BitRecord |
Information about a bit. |
|
CreateDate |
TimeStamp |
The date and time the report was created. A later timestamp indicates a newer version of the report. To update values in a report, a full updated copy of the original report should be submitted. |
|
DTimEnd |
TimeStamp |
Date and time that the reporting period ended. A report period is commonly 24 hours. |
|
DTimStart |
TimeStamp |
Date and time that the reporting period started. A report period is commonly 24 hours. |
|
VersionKind |
OpsReportVersion |
The kind of report version. For example, a preliminary version. |
|
WellDatum |
WellDatum |
Defines a vertical datum used for measured depths, vertical depths, or elevations. If one of these coordinate values is included in the report, then you must specify a well datum. This requirement only applies to this report, which is generally a copy of the same information from the well object. |
|
Association |
Notes |
|---|---|
|
From: DrillReport.WellboreInfo 0..1To: DrillReportWellboreInfo Association |
General information about a wellbore. The well is represented by the original wellbore. |
|
From: DrillReport.DrillActivity 0..*To: DrillActivity Association |
Activity breakdown, multiple for many activities. |
|
From: DrillReport.PorePressure 0..*To: DrillReportPorePressure Association |
Information about the pore pressure. |
|
From: DrillReport.WellAlias 0..1To: ObjectAlias Association |
An alternative name of the well (in a naming system). The above well name should be included in the list of aliases so that its origin can be known. |
|
From: DrillReport.WellboreAlias 0..*To: ObjectAlias Association |
An alternative name of the wellbore (in a naming system). The above well name should be included in the list of aliases so that its origin can be known. |
|
From: DrillReport.GasReadingInfo 0..*To: DrillReportGasReadingInfo Association |
General information about a gas reading. |
|
From: DrillReport.PerfInfo 0..*To: DrillReportPerfInfo Association |
General information about a well control incident. |
|
From: DrillReport.FormTestInfo 0..*To: DrillReportFormTestInfo Association |
General information about a wireline formation test. |
|
From: DrillReport.StatusInfo 0..*To: DrillReportStatusInfo Association |
General status information. |
|
From: DrillReport. To: AbstractObject Generalization |
|
|
From: DrillReport.LogInfo 0..*To: DrillReportLogInfo Association |
General information about a log. |
|
From: DrillReport.ControlIncidentInfo 0..*To: DrillReportControlIncidentInfo Association |
General information about a well control incident. |
|
From: DrillReport.Wellbore 1..1To: Wellbore Association |
|
|
From: DrillReport.ExtendedReport 0..1To: TimestampedCommentString Association |
A description of what happened from the end of report to an alternative time before the end of the next report. This is intended to allow a preliminary description of what happened from the end of the report (commonly midnight) until the time of submission of a preliminary report (commonly 6:00 in the morning). |
|
From: DrillReport.StratInfo 0..*To: DrillReportStratInfo Association |
General information about a well control incident. |
|
From: DrillReport.WellTestInfo 0..*To: DrillReportWellTestInfo Association |
General information about a production well test. |
|
From: DrillReport. To: OpsReportVersion Dependency |
|
|
From: DrillReport.Fluid 0..*To: Fluid Association |
One fluid record. |
|
From: DrillReport.EquipFailureInfo 0..*To: DrillReportEquipFailureInfo Association |
General information about equipment failure. |
|
From: DrillReport.LithShowInfo 0..*To: DrillReportLithShowInfo Association |
General information about the lithology and shows in an interval. |
|
From: DrillReport.CoreInfo 0..*To: DrillReportCoreInfo Association |
General information about a core. |
|
From: DrillReport.SurveyStation 0..*To: DrillReportSurveyStation Association |
A survey station recorded during the report interval. |