12.4.17 DrillReportStatusInfo

Topic Version	1	Published	11/11/2016	Topic Change History
For Standard	WITSML v2.0
Type:	Class		Stereotype:	«XSDcomplexType»

General status information for the drill report period.

Table 12.4.17-1 Attributes
Name	Type	Notes
ConditionHole	String64	Description of the hole condition.
DiaCsgLast	LengthMeasure	Diameter of the last casing joint.
DiaHole	LengthMeasure	Hole nominal inside diameter.
DiaPilot	LengthMeasure	Pilot hole nominal inside diameter.
DistDrill	LengthMeasure	Distance drilled. This should be measured along the centerline of the wellbore.
DistDrillRot	LengthMeasure	Distance drilled: rotating.
DistDrillSlid	LengthMeasure	Distance drilled: sliding.
DistHold	LengthMeasure	Distance covered while holding angle with a steerable drilling assembly.
DistReam	LengthMeasure	Distance reamed.
DistSteering	LengthMeasure	Distance covered while actively steering with a steerable drilling assembly.
DTim	TimeStamp	The date and time for which the well status is reported.
Engineer	String64	Name of the operator's drilling engineer.
ETimCirc	TimeMeasure	Time spent circulating from the start of the bit run.
ETimDrill	TimeMeasure	Drilling time.
ETimDrillRot	TimeMeasure	Time spent rotary drilling.
ETimDrillSlid	TimeMeasure	Time spent slide drilling from the start of the bit run.
ETimHold	TimeMeasure	Time spent with no directional drilling work (commonly in hours).
ETimLoc	TimeMeasure	Time the rig has been on location (commonly in days).
ETimReam	TimeMeasure	Time spent reaming from the start of the bit run.
ETimSpud	TimeMeasure	Time since the bit broke ground (commonly in days).
ETimStart	TimeMeasure	Time from the start of operations (commonly in days).
ETimSteering	TimeMeasure	Time spent steering the bottomhole assembly (commonly in hours).
ExtensionNameValue	ExtensionNameValue	Extensions to the schema based on a name-value construct.
Forecast24Hr	String2000	A summary of planned activities for the next reporting period.
Geologist	String64	Name of operator's wellsite geologist.
Maasp	PressureMeasure	Maximum allowable shut-in casing pressure.
Md	MeasuredDepthCoord	Wellbore measured depth at the end of the report period.
MdCsgLast	MeasuredDepthCoord	Measured depth of the last casing joint.
MdDiaHoleStart	MeasuredDepthCoord	Measured depth to the start of the current hole diameter.
MdDiaPilotPlan	MeasuredDepthCoord	The planned measured depth of the pilot hole.
MdKickoff	MeasuredDepthCoord	Measured depth to the kickoff point of the wellbore.
MdPlanned	MeasuredDepthCoord	The measured depth planned to be reached.
MdPlugTop	MeasuredDepthCoord	The measured plug back depth.
MdStrengthForm	MeasuredDepthCoord	The measured depth of the formation strength measurement.
NumAFE	String64	Authorization for expenditure (AFE) number that this cost item applies to.
NumContract	int	Number of contractor personnel on the rig.
NumOperator	int	Number of operator personnel on the rig.
NumPob	int	Total number of personnel on the rig.
NumService	int	Number of service company personnel on the rig.
PresKickTol	PressureMeasure	Kick tolerance pressure.
PresLotEmw	MassPerVolumeMeasure	Leak off test equivalent mud weight.
PresTestType	PresTestType	The type of pressure test that was run.
Rig	String64	A pointer to the rig used.
RopAv	LengthPerTimeMeasure	Average rate of penetration.
RopCurrent	LengthPerTimeMeasure	Rate of penetration at the end of the reporting period.
StrengthForm	MassPerVolumeMeasure	The measured formation strength. This should be the final measurement before the end of the report period.
Sum24Hr	String2000	A summary of the activities performed and the status of the ongoing activities.
Supervisor	String64	Name of the operator's rig supervisor.
Tubular	String64	A pointer to the tubular (assembly) used in this report period.
Tvd	WellVerticalDepthCoord	Wellbore true vertical depth at the end of the report.
TvdCsgLast	WellVerticalDepthCoord	True vertical depth of last casing joint.
TvdDiaPilotPlan	WellVerticalDepthCoord	The planned true vertical depth of the pilot hole.
TvdKickoff	MeasuredDepthCoord	True vertical depth to the kickoff point of the wellbore.
TvdLot	WellVerticalDepthCoord	True vertical depth of a leak off test point.
TvdStrengthForm	WellVerticalDepthCoord	The true vertical depth of the formation strength measurement.
TypeWellbore	WellboreType	Type of wellbore.
uid	String64	Unique identifier for this instance of DrillReportStatusInfo.
VolKickTol	VolumeMeasure	Kick tolerance volume.

Table 12.4.17-2 Associations
Association	Notes
From: DrillReportStatusInfo. To: PresTestType Dependency
From: DrillReportStatusInfo.CostDayMud 0..1To: Cost Association	Daily Mud Cost.
From: DrillReportStatusInfo.ElevKelly 0..1To: WellElevationCoord Association	Elevation of the rotary kelly bushing.
From: DrillReportStatusInfo.CostDay 0..1To: Cost Association	Daily Cost.
From: DrillReportStatusInfo.ParentWellbore 0..*To: ObjectAlias Association	The name of the parent wellbore. This is the wellbore from which the current wellbore kickedoff.
From: DrillReport.StatusInfo 0..*To: DrillReportStatusInfo Association	General status information.