12.3.2 AbstractCementStage
| Topic Version | 1 | Published | 11/11/2016 | ||
| For Standard | WITSML v2.0 | ||||
| Type: | Class | Stereotype: | «XSDcomplexType» | ||
Defines the information that is common to the cement job stage design and reports.
|
Name |
Type |
Notes |
|---|---|---|
|
AnnularFlowAfter |
boolean |
Annular flow present after the stage was completed? Values are "true" (or "1") and "false" (or "0"). |
|
BotPlug |
boolean |
Bottom plug used? Values are "true" (or "1") and "false" (or "0"). |
|
BotPlugNumber |
int |
Amount of bottom plug used. |
|
DiaTailPipe |
LengthMeasure |
Tail pipe size (diameter). |
|
DisplacementFluidRefId |
UuidString |
Reference to displacement fluid properties. |
|
ETimPresHeld |
TimeMeasure |
Time the pressure was held. |
|
ExtensionNameValue |
ExtensionNameValue |
Extensions to the schema based on a name-value construct. |
|
FlowrateMudCirc |
VolumePerTimeMeasure |
Rate the mud was circulated during the stage. |
|
Gel10Min |
PressureMeasure |
Gels-10Min (in hole at start of job). |
|
Gel10Sec |
PressureMeasure |
Gels-10Sec (in hole at start of job). |
|
MdCircOut |
MeasuredDepthCoord |
Circulate out measured depth. |
|
MdCoilTbg |
MeasuredDepthCoord |
Measured depth of coil tubing (multi-stage cement job). |
|
MdString |
MeasuredDepthCoord |
Measured depth of string (multi-stage cement job). |
|
MdTool |
MeasuredDepthCoord |
Measured depth of the tool (multi-stage cement job). |
|
MixMethod |
String64 |
Mix method. |
|
NumStage |
int |
Stage number. |
|
PillBelowPlug |
boolean |
Pill below plug? Values are "true" (or "1") and "false" (or "0"). |
|
PlugCatcher |
boolean |
Plug catcher? Values are "true" (or "1") and "false" (or "0"). |
|
PresBackPressure |
PressureMeasure |
Constant back pressure applied while pumping the job (can be superseded by a back pressure per pumping stage). |
|
PresBump |
PressureMeasure |
Pressure plug bumped. |
|
PresCoilTbgEnd |
PressureMeasure |
Pressure coiled tubing end. |
|
PresCoilTbgStart |
PressureMeasure |
Pressure coiled tubing start |
|
PresCsgEnd |
PressureMeasure |
Casing pressure at the end of the job. |
|
PresCsgStart |
PressureMeasure |
Casing pressure at the start of the job. |
|
PresDisplace |
PressureMeasure |
Final displacement pressure. |
|
PresHeld |
PressureMeasure |
Pressure held to. |
|
PresMudCirc |
PressureMeasure |
Mud circulation pressure. |
|
PresTbgEnd |
PressureMeasure |
Tubing pressure at the end of the job (not coiled tubing). |
|
PresTbgStart |
PressureMeasure |
Tubing pressure at the start of the job (not coiled tubing). |
|
PvMud |
DynamicViscosityMeasure |
Plastic viscosity (in the hole at the start of the job). |
|
ReciprocationOverpull |
ForceMeasure |
Overpull amount for reciprocation. |
|
ReciprocationSlackoff |
ForceMeasure |
Slackoff for reciprocation. |
|
SqueezeObjective |
String64 |
Squeeze objective. |
|
StageMdInterval |
MdInterval |
Measured depth interval for the cement stage. |
|
TailPipePerf |
boolean |
Tail pipe perforated? Values are "true" (or "1") and "false" (or "0"). |
|
TailPipeUsed |
boolean |
Tail pipe used? Values are "true" (or "1") and "false" (or "0"). |
|
TempBHCT |
ThermodynamicTemperatureMeasure |
Bottomhole temperature: circulating. |
|
TempBHST |
ThermodynamicTemperatureMeasure |
Bottomhole temperature: static. |
|
TopPlug |
boolean |
Top plug used? Values are "true" (or "1") and "false" (or "0"). |
|
TypeOriginalMud |
String64 |
Type of mud in the hole. |
|
TypeStage |
String64 |
Stage type. |
|
VolCircPrior |
VolumeMeasure |
Total volume circulated before starting the job/stage. |
|
VolCsgIn |
VolumeMeasure |
Total volume inside the casing for this stage placement. |
|
VolCsgOut |
VolumeMeasure |
Total volume outside casing for this stage placement. |
|
VolDisplaceFluid |
VolumeMeasure |
Volume of displacement fluid. |
|
VolExcess |
VolumeMeasure |
Excess volume. |
|
VolExcessMethod |
String64 |
Method to estimate excess volume. |
|
VolMudLost |
VolumeMeasure |
Total mud lost. |
|
VolReturns |
VolumeMeasure |
Volume of returns. |
|
WtMud |
MassPerVolumeMeasure |
Mud density. |
|
YpMud |
PressureMeasure |
Yield point (in the hole at the start of the job). |
|
Association |
Notes |
|---|---|
|
From: AbstractCementStage.Step 0..*To: CementPumpScheduleStep Association |
Set of (Time / Rate / Back Pressure). |
|
From: AbstractCementStage.EndingFluidLocation 0..*To: FluidLocation Association |
|
|
From: AbstractCementStage.OriginalFluidLocation 0..*To: FluidLocation Association |
|
|
From: CementStageDesign. To: AbstractCementStage Generalization |
|
|
From: CementDesignStage. To: AbstractCementStage Generalization |
|
|
From: CementStageReport. To: AbstractCementStage Generalization |