12.3.5 CementingFluid

Topic Version	1	Published	11/11/2016	Topic Change History
For Standard	WITSML v2.0
Type:	Class		Stereotype:	«XSDcomplexType»

Cementing Fluid Component Schema.

Table 12.3.5-1 Attributes
Name	Type	Notes
ClassSlurryDryBlend	String64	Slurry class.
ConsTestThickening	DimensionlessMeasure	Test thickening consistency/slurry viscosity: Bearden Consistency (Bc) 0 to 100.
DensAtPres	MassPerVolumeMeasure	Slurry density at pressure.
DensBaseFluid	MassPerVolumeMeasure	Density of base fluid.
DensConstGasFoam	MassPerVolumeMeasure	Constant gas ratio method: average density.
DensConstGasMethod	MassPerVolumeMeasure	Constant gas ratio method: average density.
DensDryBlend	MassPerVolumeMeasure	Density of dry blend.
Density	MassPerVolumeMeasure	Fluid density.
DescFluid	String64	Fluid description.
DryBlendDescription	String64	Description of dry blend.
DryBlendName	String64	Name of dry blend.
ETimComprStren1	TimeMeasure	Compressive strength time 1.
ETimComprStren2	TimeMeasure	Compressive strength time 2.
ETimThickening	TimeMeasure	Test thickening time.
ETimTransitions	TimeMeasure	The elapsed time between the development of 100lbf/100sq ft gel strength and 500lbf/100 sq ft gel strength.
ETimZeroGel	TimeMeasure	The elapsed time from initiation of the static portion of the test until the slurry attains a gel strength of 100lbf/100sq ft.
ExcessPc	VolumePerVolumeMeasure	Excess percent.
FluidIndex	PositiveLong	Fluid Index: 1: first fluid pumped (= original mud), last - 1 = tail cement, last = displacement mud.
FluidRheologicalModel	String64	Specify one of these models: Newtonian, Bingham, Power Law, and Herschel Bulkley.
FoamUsed	boolean	Foam used? Values are "true" (or "1") and "false" (or "0").
Gel10MinReading	PlaneAngleMeasure	Gel reading after 10 minutes.
Gel10MinStrength	PressureMeasure	Gel strength after 10 minutes.
Gel10SecReading	PlaneAngleMeasure	Gel reading after 10 seconds.
Gel10SecStrength	PressureMeasure	Gel strength after 10 seconds.
Gel1MinReading	PlaneAngleMeasure	Gel reading after 1 minute.
Gel1MinStrength	PressureMeasure	Gel strength after 1 minute.
K	DimensionlessMeasure	Consistency index (Power Law and Herschel Bulkley models).
MassDryBlend	MassMeasure	Mass of dry blend: the blend is made of different solid additives: the volume is not constant.
MassSackDryBlend	MassMeasure	Weight of a sack of dry blend.
N	DimensionlessMeasure	Power Law index (Power Law and Herschel Bulkley models).
PcFreeWater	VolumePerVolumeMeasure	Test free water na: = mL/250ML.
PresComprStren1	PressureMeasure	Compressive strength pressure 1.
PresComprStren2	PressureMeasure	Compressive strength pressure 2.
PresTestFluidLoss	PressureMeasure	Test fluid loss pressure.
PresTestThickening	PressureMeasure	Test thickening pressure.
Purpose	String64	Purpose description.
RatioConstGasMethodAv	VolumePerVolumeMeasure	Constant gas ratio method ratio.
RatioConstGasMethodEnd	VolumePerVolumeMeasure	Constant gas ratio method: final method ratio.
RatioConstGasMethodStart	VolumePerVolumeMeasure	Constant gas ratio method: initial method ratio.
RatioMixWater	VolumePerMassMeasure	Mix-water ratio.
SlurryPlacementInterval	MdInterval	Measured depth interval between the top and base of the slurry placement.
SolidVolumeFraction	VolumePerVolumeMeasure	Equals 1 - Porosity.
SourceWater	String64	Water source description.
TempComprStren1	ThermodynamicTemperatureMeasure	Compressive strength temperature 1.
TempComprStren2	ThermodynamicTemperatureMeasure	Compressive strength temperature 2.
TempFluidLoss	ThermodynamicTemperatureMeasure	Test fluid loss temperature.
TempFreeWater	ThermodynamicTemperatureMeasure	Test free water temperature.
TempThickening	ThermodynamicTemperatureMeasure	Test thickening temperature.
TimeFluidLoss	TimeMeasure	Test fluid loss: dehydrating test period, used to compute the API fluid loss.
TypeBaseFluid	String64	Type of base fluid: fresh water, sea water, brine, brackish water.
TypeFluid	String64	Fluid type: Mud, Wash, Spacer, Slurry.
TypeGasFoam	String64	Gas type used for foam job.
uid	String64	Unique identifier for this cementing fluid.
Viscosity	DynamicViscosityMeasure	Viscosity (if Newtonian model) or plastic viscosity (if Bingham model).
VolAPIFluidLoss	VolumeMeasure	API fluid loss = 2 * volTestFluidLoss * SQRT(30/timefluidloss).
VolCement	VolumeMeasure	Volume of cement.
VolFluid	VolumeMeasure	Fluid/slurry volume.
VolGasFoam	VolumeMeasure	Volume of gas used for foam job.
VolOther	VolumeMeasure	Other volume.
VolPumped	VolumeMeasure	Volume pumped.
VolReserved	VolumeMeasure	Volume reserved.
VolTestFluidLoss	VolumeMeasure	Test fluid loss.
VolTotSlurry	VolumeMeasure	Total Slurry Volume.
VolWater	VolumeMeasure	Volume of water.
VolYield	VolumePerMassMeasure	Slurry yield.
Yp	PressureMeasure	Yield point (Bingham and Herschel Bulkley models).

Table 12.3.5-2 Associations
Association	Notes
From: CementingFluid.CementAdditive 0..*To: CementAdditive Association	Additives can be added in slurry but also in spacers, washes, and mud.
From: CementingFluid.Rheometer 0..*To: Rheometer Association
From: CementJob. 0..*To: CementingFluid Association	Displaced Mud, washes and spacers, cements, displacement mud.